• How To Unbrick A Nuvi Step By Step Guide Pdf

Hi, This is a safe and easy guide for Unbrick Coolpad Note 3 Lite Stock Rom V15. So many peoples flash wrong recovery and custom ROM on their Android device and result is bricked their devices. But it is not a matter of worry because here is a guide to Unbrick Coolpad Note 3 Lite Stock Rom V15 for you.

Download Stock Firmware of Moto X4 Back To Stock, Unbrick, Fix Bootloop By installing stock firmware on Moto X4 you can solve an issue like screen freeze, stuck in the welcome screen, boot loop issue or unbrick your phone. The Moto X4 Stock firmware is now available for many regions. Here is the step by step guide on how to Download and Install Stock Nougat Firmware on Moto X4.

This is first approved ROM of Coolpad Note 3 Lite Stock Rom V15. Coolpad Note 3 Lite has 1.3GHz Quad core processor along with 3GB RAM and 16GB ROM. This phone has 5.0 inches IPS screen size with 1280*720 pixels. This phone has 13 mega pixels rear camera with LED flash and 5MP front camera in Coolpad Note 3 Lite. After reading this article you will be able to get the answer of your question How to Unbrick Coolpad Note 3 Lite Stock Rom V15.

Preparation of flash or update:

1. Take a backup of your phone Click here.
2. Your phone battery should charge 80% minimum.
3. Read all steps then do it careful.
4. Make sure proper power backup of your PC.

Must Read: Swap internal storage with the SD card in Android Lollipop and KitKat

Download ROM and Tools of Coolpad Note 3 Lite:

How to install or unbrick Coolpad Note 3 Lite Stock Rom V15:

Step 1: Install drivers on your PC (If you feel any problem in install driver then watch this video click here) and Enable USB Debugging on your Phone. Go to Settings >>> Developer options >>> USB debugging check it ( If your phone have Android 4.2 or upper version then see how to enable Developer options here is guide of this click here). After then switch off your phone.

Step 2: Extract Stock Rom V15 and SP Tool folder, where you want. Open the SP Tool and run Sptool.exe as Administrator.

Step 3: Click on Scatter-Loading option. SPTool ask you the location of the scatter file in your PC. You will find it in the extracted Stock Rom V15 folder. Now go to the Rom folder and select the file “MT6592_Android_scatter.txt” which is your Stock Rom V15 scatter file.

Step 4: Now Select firmware upgrade from dropdown menu then click on Download. And Connect your switch off phone with The PC via USB cable (Make sure your phone is switched off).

Step 5: SP Tool auto-detect your phone and process will start. If Sptool is not recognize/detect your phone then install vcom driver read this post it will help you click here (Driver already in phone flash drive if you don’t have these drivers then install it). After install Vcom driver connect your switched off phone with the PC. If you phone again not recognized by your SP Tool then try to flash via Meta mode flashing process, here is Meta-Mode flash guide click here.

Note: Don’t interrupt this process as it can potentially brick your device. Make sure no power interruption takes place.

Step 6: Now start downloading Stock Rom V15 in your phone by flashing. After the process complete, a green ring will appear. Now disconnect your updated Smartphone. If you feel any problem of flashing or update your phone then watch this video click here.

Must Read: How to use screen pinning feature in Android Lollipop

After install Unbrick Coolpad Note 3 Lite Stock Rom V15, you can root your phone because root allows you to use a maximum of your phone without any restrictions. After root you will install custom apps, Rom and custom setting in your phone. But first read Root Advantage and Disadvantage by this article, then here is a root guide: How to root Coolpad Note 3 Lite MIUI 6.

I hope you like this Unbrick Coolpad Note 3 Lite Stock Rom V15 installation guide from which you will be able to easily Unbrick Coolpad Note 3 Lite Stock Rom V15without any extra efforts. If feel any problem in this guide then please use comment box. Thanks to all.

Note: I am not responsible if you make Mistakes and Bricked Devices.

Troubles happen at the most inopportune moment and no one is insured from this. With the latest innovation made by Xiaomi and I’m talking about the introduction of the “Anti Roll Back” system, cases of bricked devices have become much more frequent. At first, this could happen only with firmware downgrade, now it’s possible to get bricked device even with firmware update.

How To Unbrick A Nuvi Step By Step Guide Pdf

Follow this tutorial and learn how to restore hardbrick Xiaomi Redmi 6 Pro and Redmi Note 5 in EDL (emergency download) mode.

Restore hardbricked Redmi 6 Pro in EDL mode

Pay attention – Do not update to ARB4 via TWRP Custm Recovery. Before unlocking the bootloader, it’s highly recommended to install the official MIUI firmware via fastboot. You can check the ARB and bootloader status on your device by following the tutorial below:

How to check ARB status on Redmi 6 Pro and Redmi Note 5 Global?

1. Reboot your device in fastboot mode.
2. Download and extract Platform Tools on “C:” drive.
3. Go into the folder with unpacked archive, hold “Shift” key and right mouse click on an empty space. Select “Open command window here”.
4. Type the “fastboot devices” command in terminal and if your phone is successfully recognized, then type the next command “fastboot getvar anti” to see the ARB status.
5. The number “3” means that you can easily downgrade the firmware on your device, if you see the number “4”, that means that you can get a hardbrick as a result of downgrading.

Download Platform Tools: platform-tools-latest-windows.zip

Requirements:

• You’ll need authorized MI account so you can flash your phone in EDL mode. To get this, you’ll most probably need to contact MIUI support a few times. To check the account permission find “account_auth.exe” in MiFlash folder and enter your account credentials.
• QDLoader HS-USB Driver installed.
• MiFlash Software installed, recommended version is 20180528.
• Official ROM for fastboot which includes ARB4.
• Hardbrick Xiaomi phone in your hands.

Now when you’ve got everything installed and got all required permissions, you can continue with unbricking tutorial:

1. Extract download fastboot ROM and MiFlash to the C: drive.
2. Start MiFlash tool.
3. Locate unpacked ROM and select “Clean All” option.
4. Press “refresh” to locate connected device.
5. Now press “flash”.
6. The new window will popup and you’ll need to enter your account credentials.
7. After successful authorization wait until the flashing process is finished completely.
8. In the end you’ll see a “success” message in “result” column.
9. Disconnect your device from PC and turn it on!

Just in case, here is the short list of possible issues:

• You can only flash one single device using your Mi account.
• If the flashing process doesn’t start try to reinstall drivers on your PC.
• If you see “Unauthorized xiaomi account” that means that your account doesn’t have the required permissions.

I really hope that this guide will be helpful to you!

If he selects Spider-Man 2099, he brings his enhanced and acrobatics abilities into use when fighting. Spiderman shattered dimension pc game download.